AMIGA 36
Machine Characteristics
- Available with two different types of feeders – feeding head (feeding from top of the pile) and bottom suction feeding (feeding from bottom of the pile - keeps the order of sheets unchanged).
- Control system with advanced built-in functions, colour touch screen display, complete with a set of buttons according to relevant standards.
Basic configuration
- Feeder: Komfi single-action head, adjustable guide plates, sheet overlap sensor, air compressor.
- Laminating Unit: Adjustable unwinding shaft, removable spread roller, IR heating with temperature sensor, rubber-coated pressure roller, adjustable stoppers, pneumatic pressure system.
- Separator & Delivery: Decurling unit, built-in film perforator, cam-driven separation roller, adjustable delivery roller and skewing wheel, fixed delivery desk with adjustable air nozzles.
SW functions included
Stop on the sheet overlap to avoid waste sheets.
Zero overlap option for thick sheets processing.
Automatic detection of pressure and temperature secures production quality.
Job preset parameters.
Built-in internet connection for service support.
Automatic sheet separation detection to protect sheets and machine from paper jams.
Intuitive user interface with built-in diagnostics and troubleshooting.
Options
Bottom suction feeder for low volume jobs processing which enables to add sheets continuously.
Air shaft for quick and easy film roll changeover.
Teflon pressure roller with non-sticking surface to reduce film or duplex print marking.
Film slitter to cut film roll to the required width.
Additional On roll perforator.
Effect foiling device with possibility to apply PSA film too.
1″ unwinding shaft for effect films.
Air ionizer for smooth sheets unloading without static charge.
Jogging table.
Roll lift for comfortable handling of laminating film rolls.
Technical specifications
| Parameter | Feeding head |
|---|---|
|
Max. speed of lamination
|
20 m/min
|
|
Max. output of the feed. head
|
8000 sheets/h
|
|
Min. sheet dimensions
|
20 × 20 cm
|
|
Max. sheet dimensions
|
36 × 70 cm
|
|
Paper weight
Paper thickness
|
115-350 g/m²
max 0.5 mm (with overlap > 0)
max 1 mm (with overlap < 0)
|
|
Max. paper pile
|
40 cm
|
|
Thickness of laminating film
|
24-50 μm
|
|
Kind of laminating film
|
OPP, PET, Nylon, PVC
|
|
Time of laminating roll warm up
|
Approx 3.5 min
|
|
Sheet overlap accuracy
|
±1 mm
|
|
Machine dimensions incl. table (LxWxH)
|
220 × 79 × 152 cm
|
|
Air supply
|
Min. 6 bar
|
|
Consumption of compressed air
|
65 l/min
|
|
Max. consumption of compressed air
|
95 l/min
|
|
Max. pressing force
|
12.8 kN
|
|
Max. linear nip pressure
|
35.5 N/mm
|
|
Max. consumption of electricity
|
6 kW
|
|
Power supply
|
6 kVA
|
|
Machine weight
|
360 kg
|
|
Recommended machine capacity
|
100 000 sheets/month
|
| Parameter | Vacuum feeder |
|---|---|
Max. speed of lamination | 15 m/min |
Max. output of the feed. head | 8000 sheets/hour |
Min. sheet dimensions | 20 × 20 cm |
Max. sheet dimensions | 36 × 70 cm |
Paper weight Paper thickness | 115-350 g/m² max 0.5 mm (with overlap > 0) max 1 mm (with overlap < 0) |
Max. paper pile | 6 cm (depending on sheetlenght) |
Thickness of laminating film | 24-50 μm |
Kind of laminating film | OPP, PET, Nylon, PVC |
Time of laminating roll warm up | Approx 3.5 min |
Sheet overlap accuracy | ±1 mm |
Machine dimensions incl. table | 230 × 79 × 152 cm |
Air supply requirements | Min. 6 bar |
Consumption of compressed air | 20 l/min |
Max. consumption of compressed air | 30 l/min |
Max. pressing force | 12.8 kN = 1.3 ton-force |
Max. linear nip pressure | 35,5 N/mm |
Max. consumption of electricity | 6 kW |
Power supply | 6 kVA |
Machine weight | 332 kg |
Recommended machine capacity | 100 000 sheets/month |
| Parametr | Hodnota |
|---|---|
|
Max. rychlost laminace |
15 m/min |
|
Max. výkon nakl. hlavy |
N/A |
|
Min. rozměr archů |
20 × 20 cm |
|
Max. rozměr archů |
36 × 52 cm |
|
Hmotnost archů |
115-350 g/m² |
|
Max. výška stohu nakladače |
3 cm |
|
Tloušťka laminovací fólie |
24-50 μm |
|
Typ laminovací fólie |
OPP, PET, Nylon |
|
Čas vytopení laminovacího válce |
cca 3.5 min |
|
Přesnost přesahu archů |
±1.5 mm |
|
Rozměry stroje včetně stolu |
185 × 89 × 150 cm |
|
Vzduchová přípojka |
Min. 6 bar |
|
Spotřeba tlakového zduchu |
|
|
Max. spotřeba tlak. vzduchu |
|
|
Max. přítlačná síla |
20.5 kN |
|
Max. lineární tlak v nipu |
39.4 N/mm |
|
Max. spotřeba el. energie |
|
|
Příkon |
3 kVA; |
|
Hmotnost stroje |
445 kg |
|
Doporučené zatížení stroje |
100 000 archů/měsíc |
For other brochures please visit the download section.
Custom-built solutions
Downloads
Possibility of individual machine modification based on specific requirements
US version available
* Technical parameters of our products are subject to change without prior notice.
* Product pictures / videos may show additional options not included in the standard delivery.